Electricity: Difference between revisions

From The Blockheads Wiki
>McClaw
>McClaw
No edit summary
 
(One intermediate revision by one other user not shown)
Line 9: Line 9:


Each of the above has as part of its block graphic a series of eight small "indicators" on the left side. For the steam generator or flywheel, it shows how much total power the unit can supply before it's drained. For a solar panel, it shows how much power it can generate based on conditions.
Each of the above has as part of its block graphic a series of eight small "indicators" on the left side. For the steam generator or flywheel, it shows how much total power the unit can supply before it's drained. For a solar panel, it shows how much power it can generate based on conditions.
==Conductivity==
To be used, electricity must be able to reach the consuming crafting surface. This requires an unbroken series of conductive materials from source to destination which can be called a conductive path. Any of the generating or storing blocks in a state to provide electricity is a source. Any electric-based crafting surface (including the electric elevator motor) being operated is a destination. If a blockhead attempts to operate a crafting surface when it has no electricity available, a red message that it needs electricity will be displayed and work will not progress until it is supplied.
A conductive path can be as short as having the source and destination vertically or horizontally adjacent to each other. If they are not, conductive items or blocks must be used to bridge the gap. Electricity will not conduct along a diagonal path.
Copper wire is a conductive item. It can be placed along back walls, in front of most blocks, or adjacent to another wire even if in mid-[[air]]. It will pass electricity regardless of the type of block it is placed on.
Many metallic blocks are conductive and will pass electricity through them. These include [[Copper Block|copper blocks]], [[Iron Block|iron blocks]], and [[Steel Block|steel blocks]].
A [[flywheel]] will pass electricity in the same way as a conductive item. What it is actually doing is receiving electricity for storage and immediately releasing it along a new path. Other electric-based crafting surfaces will ''not'' pass electricity and are only either sources or destinations.


==Use==
==Use==
Electricity will only flow between connected crafting surfaces. This is possible by having them adjacent (horizontally or vertically) or by a continuous series of copper wire between them. Note that crafting surfaces will not conduct current to other crafting surfaces (except for the [[flywheel]], which is actually a special type of generator).
The following crafting surfaces require electricity to function:
The following crafting surfaces require electricity to function:
* [[Electric Stove]] (improves on the [[campfire]])
* [[Electric Stove]] (improves on the [[campfire]])

Latest revision as of 06:56, 19 April 2015

An electric setup

Electricity is a new useable form of energy introduced in version 1.4.

Appearance

Electricity isn't an item that can be carried. The only time it's visible is when it's being conducted along copper wire or through a conductive block. At those times, it's shown as small, cyan squares moving along the wire.

Generation

There are two sources and one storage method for electricity. A steam generator or solar panel will each create electricity. A flywheel will store electricity that comes to it and supply it to connected crafting surfaces that need it.

Each of the above has as part of its block graphic a series of eight small "indicators" on the left side. For the steam generator or flywheel, it shows how much total power the unit can supply before it's drained. For a solar panel, it shows how much power it can generate based on conditions.

Conductivity

To be used, electricity must be able to reach the consuming crafting surface. This requires an unbroken series of conductive materials from source to destination which can be called a conductive path. Any of the generating or storing blocks in a state to provide electricity is a source. Any electric-based crafting surface (including the electric elevator motor) being operated is a destination. If a blockhead attempts to operate a crafting surface when it has no electricity available, a red message that it needs electricity will be displayed and work will not progress until it is supplied.

A conductive path can be as short as having the source and destination vertically or horizontally adjacent to each other. If they are not, conductive items or blocks must be used to bridge the gap. Electricity will not conduct along a diagonal path.

Copper wire is a conductive item. It can be placed along back walls, in front of most blocks, or adjacent to another wire even if in mid-air. It will pass electricity regardless of the type of block it is placed on.

Many metallic blocks are conductive and will pass electricity through them. These include copper blocks, iron blocks, and steel blocks.

A flywheel will pass electricity in the same way as a conductive item. What it is actually doing is receiving electricity for storage and immediately releasing it along a new path. Other electric-based crafting surfaces will not pass electricity and are only either sources or destinations.

Use

The following crafting surfaces require electricity to function:

Added in version 1.5:

Added in version 1.6:

These crafting surfaces craft most items craftable at their non-electric counterparts with the same required items, but instead of using fuel directly, they must have a supply of electricity.

Notes

Due to how they interact, using electric crafting surfaces makes more efficient use of fuel. Crafting using electric crafting surfaces takes half the time it would take to craft the same items on the non-electric versions; however, they retain the same rush cost. Some craftings may also require less materials.